How do I connect my laptop to my home theater system to listen to the music through the theater speakers?
Question by Trickle***: How do I connect my laptop to my home theater system to listen to the music through the theater speakers?
I want to listen to Yahoo Radio stations on my louder home theater system instead of the smaller laptop speakers. I have an Onkyo receiver that has surround sound speakers and I would like to set up my computer to play music from online radio stations at a party I am having. Is this possible?
Best answer:
Answer by sellin28
Yes this is possible. You could get a Bluetooth audio adaptor and connect the receiving end to an open input on the back of your receiver. Or you could get a fm modulator typically used to play ipods or mp3 players through your cars radio. Connect the plug into your computer speakers headphone jack and then tune your home theater to the correct station. The computer would need to be within 10 feet or so of the home theater system for this way to work.
Bluetooth adaptor would be higher quality, but more expensive and harder to find locally. Fm transmitter willwork and be easy to find at any department store.
Add your own answer in the comments!
September 20th, 2011 at 14:10
I use the ROKU Soundbridge to stream all the music on my PC to my pool area. It works both wired and wireless and only costs about $ 100.
http://www.roku.com/products_soundbridge.php
Or, you can by an RCA Y cables that goes from headphone jack on your laptop to an RCA inpupt on your receiver.
weeder
September 20th, 2011 at 14:48
Hi:
Assuming that the back of your Onkyo receiver has some form of “Audio In” or “Auxiliary In” plugs; and assuming that the connection is just 2 RCA type plugs in the back of your Onkyo receiver; there is a way for your receiver to provide BIG audio from your computer.
I’m sure your computer or laptop has some form of mini-plug connection for headphones. That’s how your computer sends audio out.
If your hardware has these connections, then you can get BIG audio sound to your receiver from your computer by getting what is called a “Y” plug. It has two RCA plugs on one end and one mini-audio plug on the other end. Some Y cables have RCA plugs on both ends. Don’t get that one.
Go to either Radio Shack, Best Buy or whatever your favorite audio/electronic store is and ask for a “Y” cable with the connection specs I’ve described. If you need extra length to connect the Y cable from your computer to your receiver, ask for a mini-plug extension cable as well. They can come in several lengths.
Connect the RCA plugs into the “Audio In” (or “Auxiliary”) connectors on the back of your recevier. Then connect the mini-plug end into the headphone jack of your computer. Set your reciever channel to “Auxiliary” and it will broadcast whatever audio is coming from your computer. I might be making a mistake about the headphone jack on your computer. If your computer has one of those large headphone jacks (and not a mini-plug), then get a [mini-plug to large headphone plug] adapter for your cable.
If you are successful in making the connections on both ends, you will have the ability to maximize your audio experience by using the equalizer controls on your Onkyo receiver. The cable set up is how I’m able to amplify the audio from my laptop. It’s great when I want BIG sound from the web sites I stream and when I play iTunes. I hope my suggestion is helpful to you. Take care.