Vantage Point CGUPM12-B Universal Front Projector Mount – Black
Jan.26, 2010 in
Home DLP Product
- Universal LCD/DLP projector mount with 12″ drop
- Tilt and yaw (roll) adjustment
- 360-degree rotation
- Individual height adjustment for each mounting arm
Product Description
The Universal Projector Mount sets itself apart from other industrial looking ceiling mounts. Styled from steel and die-cast aluminum, the mounts boast a clean and simple finished appearance when viewing it on the ceiling. The CGUPM06 extends approximately 12 inches from the ceiling, rotates, tilts and swivels in virtually any direction, and is capable of functioning on flat or vaulted ceilings. The Universal Projector Mount is compatible with most of today?s LCD and DLP home theater projectors and is fully adjustable to fit a wide range of projector hole patterns…. DLP Discounted. Thank you!
Vantage Point CGUPM12-B Universal Front Projector Mount – Black
January 26th, 2010 at 20:14
I bought this for my black Infocus x9 projector. Everything matched up perfectly, the quality is great. It is very adjustable and can be locked in any position. I’m considering ordering another for my other projector. Only problem is the price is a bit steep.
Rating: 5 / 5
January 26th, 2010 at 20:32
Arrived quickly and performed as described. Heavy soild construction. Holds my large Mitz. HC-5500 with no problem. Would highly reccomend.
Rating: 5 / 5
January 26th, 2010 at 22:53
I used this to install a HC1500 Mit. Projector and I couldn’t be happier with the product. It is very heavy duty, and has many adjustments. I can not think of a way it could be better.
Rating: 5 / 5
January 27th, 2010 at 01:05
Top Quality! Easy to install and strong enough to hold even the heaviest of projectors. Sturdy!
Rating: 5 / 5
January 27th, 2010 at 02:39
This is a very good projector mount. I had a very difficult install ahead of me (low basement ceiling, with a support beam blocking my projector view on the ceiling (I had to mount the project behind the beam to get my 106″ image). Needless to say, this was not going to be an easy install to get the image lined up without the beam interfering (and I have a DLP projector with not many placement options and limited zoom).
Long story short, this mount worked. I would have liked the three twist screws that connect the projector to the mount to be more flexible without having the projector come loose (which it did a few times). Making the ever so fine adjustments was a bit difficult since I could not get a screwdriver in there being only a few inches below the ceiling. I eventually used a drill bit and vice grip to do the job. Again, this was about a difficult install as you could probably do and this mount did the job. In most people’s installs, you can adjust the arms alone and achieve great results…I had to use everything I could do to get this to seat perfectly.
I highly recommend the mount and I would be surprised if this couldn’t meet your installation needs. Fit and finish is excellent and the mount won’t budge once properly tightened (which is good because I do not look forward to adjusting my projector anytime soon).
Rating: 4 / 5