Vantage Point CGUPM06-S Universal Front Projector Mount – Silver
Oct.23, 2010 in
Home DLP Product
- Universal LCD/DLP front projector mount with 6″ drop
- Tilt and yaw (roll) adjustment
- 360-degree rotation
- Individual height adjustment for each mounting arm to compensate for curve of projecture chassis
Product Description
The Universal Projector Mount sets itself apart from other industrial looking ceiling mounts. Styled from steel and die-cast aluminum, the mounts boast a clean and simple finished appearance when viewing it on the ceiling. The CGUPM06 extends approximately 6 inches from the ceiling, rotates, tilts and swivels in virtually any direction, and is capable of functioning on flat or vaulted ceilings. The Universal Projector Mount is compatible with most of today¿s LCD and DLP home theater projectors and is fully adjustable to fit a wide range of projector hole patterns…. DLP Discounted. Thank you!
Vantage Point CGUPM06-S Universal Front Projector Mount – Silver
October 23rd, 2010 at 02:36
Need a simple ceiling projector mount for your conference room or multifunction room? This is it; after doing some research decided on the Vantage Point product and had our projector installed in less than 30 min. Two small points for improvement:
1) They need better instructions. There was not enough explanation on what parts to use with different projectors.
2) Easier fine tune adjustments for aiming the projector.
Overall for the money a great projector mount.
Rating: 4 / 5
October 23rd, 2010 at 04:10
The mount looks excellent. The projector I purchased was listed on the site as one that worked with this particular mount. When we got it out to mount it – I was excited – thinking this would be easy – UNTIL I tried putting it together for the first time and realizing the screws that came with it were all TOO big. I ended up at Bet Bu (which did not have any mounts in stock) and bought a TV trey mount and the screws that came with it worked. Not the cheapest or easiest solution – but it now works. Before you order, even if your projector is listed – make sure it will work…
Rating: 3 / 5
October 23rd, 2010 at 06:21
I bought this because it said “Universal” but it wasn’t quite universal. I have a small optoma projector (http://www.amazon.com/gp/product/B002DUCKNK/ref=oss_product) with only three screw mount holes in the bottom. I found no way to mount my projector and had to return this item.
It seemed like a fine product if it fits your machine.
Rating: 3 / 5
October 23rd, 2010 at 07:37
I bought this for my Sony HS60 PJ. Mounted its pretty solid, over a few months I had to tweak the tilt a couple times because of a slamming door or something shaking the ceiling (apartments!) but really it does its job well. For more money you might find one a little more attractive or whatever but really you don’t need much more than this unless you are getting into some serious weights. Provided thumbscrews went into the size my SONY had no problem, I’m assuming most PJs use the same size. My only complaint is the screw in cam that you use a rod to insert into and do a final tighten is a bit tedious but not impossible.
Rating: 4 / 5
October 23rd, 2010 at 07:53
great price, easy to install – I DID have to purchase screws that would fit my projector for its mounting but for this price, I was not put off.
Rating: 5 / 5