Best answer:

Answer by Earth: The Connected Home
Check the back of your TV for an audio output. If you have one, you can plug it into an input on your surround system.

Know better? Leave your own answer in the comments!

hdtvprojectorscreen.com Choosing the right projector screen material is essential for getting the most out of your projector. In this video I go into the details about some of the more common material types used in commercial screens, and diy screens. For more check out hdtvprojectorscreen.com
Video Rating: 0 / 5

BenQ Korea 2010 New Products – DLP 3D Projector Technology Introduction (Record : Acrofan)
Video Rating: 0 / 5

I wondered if it was a grounding issue, but the cable doesn’t have a ground prong.

Best answer:

Answer by Hagar Viking
hi josh….if your sub woofer cable is the original that you received when purchased…its a bit strange that it does not have a earth/ground prong,so i would not replace with a three pronged plug…i think the problem may be with the sub woofers amplifier….another possibility…one should never run lighting with components from the same power board for eg, that can cause some really strange problems…you should run this sub woofer to its own power outlet from the wall…..so providing its not any of those things i’ve mentioned…i would advice you to seek professional help from a reputable technician/service provider.

Give your answer to this question below!

We have even more CES reports! Sony and LG introduce OLED displays, Vizio reveals a 21:9 ultra-wide HDTV, and Optoma releases a new line of 3D ready projectors! Watch the video to see why Patrick and Robert are excited about these new HDTVs.
Video Rating: 4 / 5

GeekBeatTV #315: revision3.com A tiny-but-powerful projector, a charger for ALL of your gadgets, and getting OnStar in any car! ~~~~~~~~~~~~~~~~~~~~ 0:26 Qumi Qumi is a very compact pocket projector with a 300 lumen brightness, up to 720p resolution, and up to 30000 hours from its LED lamp. geekbeat.tv 2:04 iDapt i4 I never keep my gadgets charged, but this charge station is actually getting me to change that. The company says its available interchangeable plugs make it compatible with more than 4000 devices. geekbeat.tv 03:56 OnStar FMV OnStar FMV (For My Vehicle) is an aftermarket rear view mirror that allows you to have the services of OnStar in any make of car. geekbeat.tv ~~~~~~~~~~~~~~~~~~~~ Checkout all of the Revision3 Halloween episodes! www.revision3.com We’d love for your to Like, Favorite and Share today’s episode on YouTube! www.youtube.com GeekBeatTV #315: revision3.com Thank you to all of you Geekers for participating and commenting! Who’s getting OnStar for their car?! Who thinks iDapt i4 TOTALLY rocks?! Here is where you can find us! Cali on Twitter: twitter.com Cali on Facebook: facebook.com GeekBeatTV website: www.geekbeat.tv GeekBeatTV on Twitter twitter.com GeeBeatTV on Facebook: facebook.com Thanks Geekers!

A few short clips showing the out of the box quality of the BenQ W710ST projector. The footage is projected onto a white wall that has quite a rough texture and a glossy finish.All the walls in my front room are white and there was quite a bit of ambient light coming in even though i’d closed the curtains.I think the picture quality is fantastic even though it’s not pitch black in there. As this is the first projector i’ve owned i can’t compare it to any others but i consider it to be money well spent.I know it only does 720p but for what i intend to use it for it’s ideal. The screen size is 100″ and the projector is sat 5′ 3″ away from the wall. I left the sound off so you wouldn’t be distracted. The speaker on the projector is ok for what it is and would be fine for a presentation or in a classroom.If you’re going to watch plenty of movies on it, i would suggest a good quality surround sound system.
Video Rating: 4 / 5

I’m looking at the Dell 1200MP DLP projector (received pretty good CNET reviews, but others look good on costco.com ). Is there anyone out there who knows anything about overall picture quality, brightness, and bulb longevity for projectors?

Best answer:

Answer by EVY
it depend how many window do you have in your classroom if is to bright the picture wont we as good as in a dark room

What do you think? Answer below!

Though Id put together a bit of info on the 3DXl Projector adapter. The firmware upgrade for my HD65 came out towards the end of December 2011 so I took the plunge and purchased the Adapter and the glasses from Tesco Direct . First thing to do was download the free upgraded firmware for the projector which took around 10 mins from the very clear instructions on the Optoma web site. www.optomaeurope.com Price for the Adapter was £199 and an extra pair of glasses cost £59 also from Tesco. Initially I had a lot of setup issues and this really prompted me to put this film together. Main issue was red flaring on the screen coupled with blurring and signal loss on non 3d channels. Eventually I came to realise that the cables were not up to scratch from my sources (PlayStation and Sky Hd box) and also found a thread that suggested lowering the output of the HD box to 720p in the Sky setup page. So out to Maplins and got a 20m 1.4 HDMI cable (ouch ) for £60 and a .5m 1.4 hdmi cable for ( ouch ) £20 lowered the resolution to 720 and low and behold perfect operation and stunning 3d images. and full switching between playstation / Blueray and Sky HD Box. All in all a great upgrade which allows the viewing of 3d at a pretty good price . Saved me investing in a new tv and gives me 75″ 3d tv at one swoop. Any questions give me a shout . Sorry about the poor camera work at the end I wasnt paying enough attention.
Video Rating: 5 / 5

www.barco.com Barco’s RP-360 is a future-proof response to the ever-growing need for realism, with the most accurate image quality on the market today, and the only system to offer full 360° immersion with rear projection. At a glance • 13 or 14 projectors • 25:1 system contrast • Resolution better than 4 arcmin/OLP • 10ftL brightness • can fit in rooms down to 14ft high Barco’s RP-360 is designed from the ground up with Barco technology. Our powerful design tools allow us to accurately predict the system’s ideal setup and performance, and feedback from the field allows us to improve our process each time. The dome’s entire mechanical structure, projection and screen technology are all Barco-designed, with in-depth know how of simulation setups all over the world. Superior design, better realism Barco designs the dome’s screens with a special coating that increases its overall image quality, while the system’s spherical shape provides the pilot in training with constant eye relief. There is no disturbance from any type of front projection. Furthermore, the standard projector that drives Barco’s RP-360 is a native 10 megapixel projector with liquid crystal on silicon (LCoS) technology. It features the following dedicated technologies for multi-channel setups: • DynaColor: automatic color calibration across channels • Linked constant light output: brightness equalization across channels • Edge blending: creates one seamless composite image • Warping: precise geometry …
Video Rating: 4 / 5

A little clip of my projector playing Pulp Fiction in Blu Ray Sorry about the darkness of the room and the quality is low cause i’m video recording from an Olympus 10 Mpixel digital photo camera so the resolution is 640×480 at 30fps. Also take into considaration that the video quality is heaps better when you audition this unit personally in a bat cave its also pretty bright at 2200 lumens. I reccomend it cause its very cheap and affordable.
Video Rating: 5 / 5

Best answer:

Answer by John Smith
Of course. They do not interfere with each other. He will hear everything from the home theater system and you will hear it from the turtle beach. I have always done this with my brother. Please make best answer so I can hit 100 best answers.

Add your own answer in the comments!